How to Install Virtual USB MultiKey Driver on Windows 10
How to Install Virtual USB MultiKey Driver on Windows 10
If you are looking for a way to use a virtual USB dongle emulator on your Windows 10 system, you may need to install the Virtual USB MultiKey driver. This driver allows you to create a virtual USB device that can emulate a physical dongle and bypass the software protection. However, installing this driver on Windows 10 is not straightforward, as it requires some steps to disable the driver signature enforcement and use a third-party tool. Here is a guide on how to install the Virtual USB MultiKey driver on Windows 10.
virtual usb multikey 64 bit driver download
Step 1: Download the Virtual USB MultiKey driver
The first step is to download the Virtual USB MultiKey driver from a reliable source. You can find it on some websites that offer dongle emulation services, such as [^1^] or [^2^]. Alternatively, you can use the link below to download the driver directly:
https://www.driverdouble.com/drivers/virtual-usb-multikey.html
Make sure you download the correct version of the driver for your system architecture (32-bit or 64-bit).
Step 2: Disable the driver signature enforcement
The next step is to disable the driver signature enforcement on your Windows 10 system. This is a security feature that prevents the installation of unsigned drivers, which may be harmful or incompatible with your system. However, since the Virtual USB MultiKey driver is not signed by Microsoft, you need to disable this feature temporarily to install it.
To disable the driver signature enforcement, follow these steps:
Press Windows + I keys to open the Settings app.
Click on Update & Security.
Click on Recovery from the left pane.
Under Advanced startup, click on Restart now.
After your system restarts, choose Troubleshoot from the menu.
Choose Advanced options.
Choose Startup Settings.
Click on Restart.
After your system restarts again, press F7 key to select Disable driver signature enforcement.
Your system will boot normally with the driver signature enforcement disabled.
Step 3: Install the Virtual USB MultiKey driver
The final step is to install the Virtual USB MultiKey driver using a third-party tool called DevCon. This is a command-line tool that can manage devices and drivers on your system. You can download it from Microsoft's website:
https://docs.microsoft.com/en-us/windows-hardware/drivers/devtest/devcon
After downloading DevCon, extract it to a folder of your choice. Then, follow these steps:
Copy the Virtual USB MultiKey driver file (MultiKey.sys) to the same folder where you extracted DevCon.
Open a command prompt as administrator.
Navigate to the folder where you have DevCon and MultiKey.sys.
Type the following command and press Enter:
devcon install multikey.inf root\multikey
If the installation is successful, you should see a message like "Device node created. Install is complete when drivers are installed..."
You can check if the Virtual USB MultiKey device is installed by typing this command and pressing Enter:
devcon status root\multikey
If the device is installed, you should see a message like "1 matching device(s) found."
Congratulations! You have successfully installed the Virtual USB MultiKey driver on your Windows 10 system. You can now use a virtual USB dongle emulator to run your protected software without a physical dongle. 0efd9a6b88