How to Download and Install URC Complete Control Program (CCP) .rar
URC Complete Control Program (CCP) .rar is a software suite for programming the entire range of URC Professional Remotes that fall under the Complete Control banner. This includes models such as MX-980, 900, 880, 890, 990, 780, X-7, X-8 and more. If you want to customize your URC remote with your own settings and macros, you will need this software. However, it is not easy to find online as it is intended for authorized dealers only. In this article, we will show you how to download and install URC CCP .rar on your computer.
There are a few sources where you can download URC CCP .rar, but not all of them are reliable or safe. One of the best places to get it is from the Internet Archive[^1^], which hosts a copy of the software from 2013. This version may be outdated but still usable for most URC remotes. To download it, follow these steps:
Go to https://archive.org/details/ccpsetup-2013-03-26
Click on the \"DOWNLOAD OPTIONS\" section on the right side of the page.
Select \"ZIP\" from the list of formats.
Save the file to your computer.
Step 2: Extract URC CCP .rar
Once you have downloaded URC CCP .rar, you will need to extract it using a software that can handle .rar files, such as WinRAR or 7-Zip. To extract it, follow these steps:
Right-click on the downloaded file and select \"Extract Here\" or \"Extract to ccpsetup-2013-03-26/\" depending on your software.
A folder named \"ccpsetup-2013-03-26\" will be created in the same location as the downloaded file.
Open the folder and double-click on the file named \"ccpsetup.exe\" to start the installation process.
Step 3: Install URC CCP .rar
The installation process of URC CCP .rar is straightforward and should not take more than a few minutes. To install it, follow these steps:
Follow the instructions on the screen and accept the license agreement.
Select a destination folder for the software or use the default one.
Click on \"Install\" and wait for the installation to complete.
Click on \"Finish\" and launch the software from your desktop or start menu.
Step 4: Install Remote Drivers
The last step before you can start programming your URC remote is to install the drivers for your specific model. This can be tricky and may require some tweaking of your system settings. To install the drivers, follow these steps:
Connect your URC remote to your computer using a USB cable.
If Windows does not recognize your remote automatically, go to the installation folder of URC CCP .rar (usually C:\\Program Files (x86)\\Universal Remote Control\\Complete Control Program) and open the folder named \"Drivers\".
Find the folder that matches your remote model and open it.
Right-click on the file named \"install.bat\" and select \"Run as administrator\".
A command prompt window will open and run some commands. Wait for it to finish and close it.
If you get a message that says \"Windows requires a digitally signed driver\", you will need to disable driver signature enforcement on your computer. To do this, follow these steps:
Restart your computer and press F8 repeatedly during boot up until you see a menu with advanced options.
Select \"Disable Driver Signature Enforcement\" and press Enter.
Your computer will boot normally but with driver 0efd9a6b88